- #Blackmagic multidock bootcamp install#
- #Blackmagic multidock bootcamp download#
- #Blackmagic multidock bootcamp windows#
On RAID 6 it uses 2 drives for redundancy, so you need at least 4 drives or more to make it work, again if you increase the number of drives in total you still only lose the capacity of 2 drives. It's usually recommended that you make a backup of a RAID 5 system before rebuilding. If any of the drives fail then rest will carry on working although you need to get the broken one replaced quickly before anything goes wrong with the other drives, and even then the stress of the system rebuilding the RAID onto the new drive can cause others to fail. With RAID 5 you will always lose the capacity of 1 drive, but as you increase the amount of drives on the RAID you will still only lose the space of 1 drive. RAID 5 works perfectly well with 3 drives or more. Just a short clarification on RAID 5 & 6 in general terms I've never tried to use a multidock for RAID, although the blurb does say they can be striped But I didn't have success on my one attempt at a RAID on it, and I don't think your needs require a RAID anyway. A Multidock is a pretty cool unit for dropping in SSDs and editing, and moving on.
But with the interfaces being faster, and the speed of SSDs, I'm not so sure you are in need of one. If you were doing uncompressed video, you'd need one. I wouldn't think you'd even see that much benefit from it. Next up, I have to ask if you are sure you even need a RAID. Maybe someone else has a positive experience they can share about it. But I thought I did, and it looked like it just didn't work. I scratched my head for a minute, and moved on. The Disk Utility told me it RAIDed the four SSDs, but my capacity didn't increase at all. I tried doing a RAID 0 on one a couple of weeks ago. The multidock only takes SSDs and small format drives. 10 is two RAID 0 's mirrored to each other, so you only have the speed and capacity of two drives. Useful for speed and capacity, but if one fails, they all fail. RAID 0 is a bunch of disks striped together with no rududancy or safety net. With four, your best options are RAID 0 or RAID "10".
You really need 6 or 7 to make them a good quality, robust solution. That said, neither work very well with 4 or fewer drives. RAID 6 has taken its slot, though it loses a little capacity in favor of a better parity scheme. But from what I understand, RAID-5 has become "old school" in the world of RAIDs, and is now considered nearly obsolete in design.
#Blackmagic multidock bootcamp download#
Or you can use uncompressed or download the DNxHD codec.I've dealt with a lot of raid configurations, but I wouldn't call myself an expert. It is available as a "read only" codec for PC's but you cannot write out Hyperdeck ProRes on a PC. Hyperdecks want to use ProRes422, which is an Apple codec. You also may want to consider that you may be missing the codec. There's always this instead of the multidock. Next, are you sure your thunderbolt card is actually working? Need drivers? If you used the deck to format, it is likely formatted in HFS. They recently added the ability to format the SSD in the Hyperdeck, but I don't recall what file system they use there.
#Blackmagic multidock bootcamp install#
Alternately, you can install HFSExplorer, Paragon HFS, or MacDrive on your PC to add HFS ability. Did you format the SSD drive? You'll probably want to make sure they are formatted in ExFat, to work with the Hyperdecks as well as a PC.
#Blackmagic multidock bootcamp windows#
While Hyperdecks do have some compatibility with windows machines, they are really Mac-centric.
0 kommentar(er)
